Meteor NF.11 Hybrid WD790

This is a simple nose cone to make the aircraft WD790, decals for two options for this aircraft can be found on Alley Cat sheet ACD72003 as per the attached image. The nose sone will fit either the original Matchbox release or the more recent Xtrakit release.

Gannet COD Mk 4 & ECM.6

This set comprises two pods and pylons as well as a Radome blank. This is for the Revell ASW kit, especially the blank for the lower fuselage, however I am sure the pod pylons can be adapted to fit the Trumpeter kit.

Nimrod Canopy Set

This set comprises the a new clear cast main canopy for the Airfix Nimrod kit. A full set of masks are provided for the canopy and for all the other clear parts that are included in the kit and the corrected landing lights included in the Alley Cat Engine set. Masks are also provided for the scabb plates around the main canopy, careful painting with the use of these masks will help create these very noticable plates around the canopy. To complete the set 4 photo-etched windsceen wiper blades are included.

The masters and all the research and artwork for masks and the wiper blades were expertly done by Lee Coll.

Meteor U.16 /21 Conversion

This set comprises the new wing tip parts new nose cone, RVMDI radomes, wing pylons and targets, and the engine mounted flare packs, and an updated instrument panel, also some of the larger aerials in resin and a small photo-etched sheet to complete the detailing. The set is designed for the Xtrakit /MPM /Airfx Mk 8 Meteor kits but I am sure could be adapted to fit other models as well.

Supplied in the set, is a set of decals to do one of six aircraft, one serial number having four variations, making 9 variations. There are four aircraft that operated from Llanbedr WK800 code Z with the RVDMI, WK800 code Z with three different nose door markings, WH453 code L, WH320 code N, Royal Navy aircraft WF716 nose code 658, two Austarlian operated aircraft A77-882 and AA7-876 from Woomera.  Some additional decals maybe required from the original kit.

The masters and all the research and artwork for the set were expertly done by Alan Southcombe.

Meteor U.15 Conversion

This set comprises the special wing tip parts with all the lumps and bumps, also some of the larger aerials in resin and a small photo-etched sheet to complete the detailing. The set is designed for the MPM Mk 4 Meteor kit but I am sure could be adapted to fit other models as well.

Supplied in the set, is a set of decals to do one of six aircraft. There are three aircraft that operated from Llanbedr VW280 code P, RA479 code E, VZ415 code A, VT330 from Woomera with Australian markings and 2 Royal Navy aircraft RA375 nose code 658 tail code F, and VT268 nose code 656. Some additional decals maybe required from the original kit.

The masters and all the research and artwork for the set were expertly done by Alan Southcombe.

SC.9 Canberra conversion

This set comprises a new nose section and the specific wing tanks for the 1/72 scale Xtrakit model. However it will fit the Matchbox PR.9 kit as well with very minor modification. The kit wil also be released to fit the new Airfix PR.9

The nose section is a direct replacement part, and the tanks fit directly onto the wings and a small drilling template is supplied to assist in the positioning.

Supplied in the set is a set of decals to do one of four schemes the aircraft flew in, some additional decals will be required from the

original kit.

FAIREY GANNET WING FOLD (Revell kit)

This is designed to be used with the Revell kit, due to further rearch material being available for this set, this wing set is very accurate and is very different to the previous wingfold for the Trumpeter kit.

A full and complete wingfold set. This kit has been designed an manufactured with the assistance of CMR.

 BAe NIMROD FIN, SCP INTAKE & NOSE WHEELS (Airfix kit) 

This is a small set but the area's that are updated will add a finishing touch to the Nimrod model

  BAe NIMROD ENGINE UPGRADE SET (Airfix kit)

This is a very comprehensive set of seamless intakes, engine panels, thrust reversers and new exhaust tubes

This set was developed over a six month period and huge amout of research was carried out by myself and by many assiatants.

The Nimrod wing and engine layout is very complex and due to limitations with the kit and the fact that there are no scale drawings, therefore the set was based very much on photographic referances.

Due to the complexity of the upgrade set and care and patience will be required, but the end result will make a huge improvement to your Nimrod model.

A full set of colour printed instructions are included to aid assembly.

DUE TO HIGH CUSTOMER DEMAND PLEASE ALLOW A LITTLE EXTRA TIME FOR DELIVERY OF THIS SET

  Halifax Extended Wing Tips for Airfix kit

The kit wings need to be cut off at the outer edge of the ailerons, and the new tips are then added to the wings.

These tips are handed and are marked with a 'P' for the port side

This type of wing tip was fitted to production Halifax III's from circa Febuary 1944, to all Halifax B Mk VI, B Mk VII, A Mk IX and subsequently the various civil conversions thereof.

   Lincoln Style Tail and Rudder for Lancaster

These are replacement parts for the parts (121 and 124) in the Revell kit

 The Lincoln rudders were often used on late war and post war aircraft, they are also currently used on the

Battle of Britian Memorial Flight Lancaster.

   BAe Nimrod Weapons Bay

This is a prinicpally a drop in replacement set.

 There is only a minimal amount of part clean up and work required on the actual kit. 

The full set comprises of 12 parts, the main bay, 8 weapons hangers and 3 new bulkheads.

A full set of colour printed instructions are included to aid assembly.

  100% LERX FOR HARRIER

To be used with the Hasegawa kits.

This is a prinicpally a drop in replacement piece.

 There is only a minimal amount of part clean up.

Fairey Gannet Wing Fold 

This is designed to be used with the Trumpeter Kits

A full and complete wingfold designed to fit onto the Trumpeter 1/72 scale kits This kit has been designed an manufactured with the assistance of CMR.