Messerschmitt Bf 109B Conversion Set

This set is designed to be used with the Eduard E-1 kit although with a little extra work the E-3 can be used.

This set comprises a complete of resin parts that are required to convert the Eduard kit.

32 resin parts are included for the conversion.

Messerschmitt Bf 109A Conversion Set

This set is designed to be used with the Eduard E-1 kit although with a little extra work the E-3 can be used.

This set comprises a complete of resin parts that are required to convert the Eduard kit.

32 resin parts are included for the conversion.

Messerschmitt Bf 109D 'Swiss' Conversion Set

This set is designed to be used with the Eduard E-1 kit although with a little extra work the E-3 can be used.

This set comprises a complete of resin parts that are required to convert the Eduard kit.

28 resin parts are included for the conversion.

Decals are supplied to enable one of 10 aircraft to be modelled, all in the early scheme, or J-307 as shown. Some of the kit decals may be required to complete the markings and or stencil data.

Note decal images will follow soon, it should be noted that all the major markings are included to complete the schemes shown, that includes all national markings and the individual scheme markings.

The masters were done by Phil Edwards, with artwork and decals by Alan Southcombe.

Messerschmitt Bf 109D & B Conversion Set

This set is designed to be used with the Eduard E-1 kit although with a little extra work the E-3 can be used.

This set comprises a complete of resin parts that are required to convert the Eduard kit.

32 resin parts are included for the conversion.

Decals are supplied to enable one of four aircraft to be modelled. Some of the kit decals may be required to complete the markings and or stencil data.

Note decal images will follow soon, it should be noted that all the major markings are included to complete the schemes shown, that includes all national markings and the individual scheme markings.

The masters were done by Phil Edwards, with artwork and decals by Alan Southcombe.

Messerschmitt Bf 109D Conversion Set

This set is designed to be used with the Eduard E-1 kit although with a little extra work the E-3 can be used.

This set comprises a complete of resin parts that are required to convert the Eduard kit.

28 resin parts are included for the conversion.

Messerschmitt Bf 109C Conversion Set

This set is designed to be used with the Eduard E-1 kit although with a little extra work the E-3 can be used.

This set comprises a complete of resin parts that are required to convert the Eduard kit.

28 resin parts are included for the conversion.

Kawasaki Ki-100 (Bubble Top) Conversion

This set requires any of the Hasegawa Kawasaki Ki 61-I Hein (Tony) kits as the donor kit.

This set comprises a complete new fuselage, under fuselage section with intergral wing spare, engine, propeller blades, spiner, chin radiator, rear cockpit deck parts, 3 part clear cast canopy, new clear wing tip lights, separate rudder, correct type gunbay covers (not supplied in all donor kits )

20 resin parts, 6 clear resin parts, 1 length 0.5mm plastic rod

Supplied in the set, is a set of decals to do one of three aircraft. The kit decals will be required to complete the markings.

Kawasaki Ki-100 (Razor Back) Conversion

This set requires any of the Hasegawa Kawasaki Ki 61-I Hein (Tony) kits as the donor kit.

This set comprises a complete new fuselage, under fuselage section with intergral wing spare, engine, propeller blades, spiner, chin radiator, rear cockpit deck parts, 3 part clear cast canopy, new clear wing tip lights, separate rudder, correct type gunbay covers (not supplied in all donor kits )

20 resin parts, 6 clear resin parts, 1 length 0.5mm plastic rod

Supplied in the set, is a set of decals to do one of three aircraft. The kit decals will be required to complete the markings.

The masters and the research and artwork for the set were expertly done by Phil Edwards.

Messerschmitt Me 109 T2  Conversion

This set comprises the new extended wing tips as well as new etended slats and ailerons, also included is a 3 part 300 litre centre line drop tank, new drop tank base and a new engine air intake (Fiesler type) used on the later models as well as a small photo etch sheet that contains carrier hooks and the scribing template for the spoilers that are on the upper wing surfaces. The set is designed for the Eduard Bf 109 E-4 kit but could possibly be used with other kits as well.

Supplied in the set, is a set of decals to do one of six aircraft. They are as follows Black 6 of JG11, Yellow 7 of NJG 101, Black 11 of JG11  and Yellow 1, Red 5 and Yellow 7 all of JG77. The kit decals will be required to complete the markings.

The masters and the research and artwork for the set were expertly done by Alan Southcombe.